home *** CD-ROM | disk | FTP | other *** search
- WINRECTSTRUCT
- origX
- origY
- relYO
- KERNEL
- GetModuleHandle
- SetWindowText
- IsWindow
- GetWindowRect
- GetClientRect
- SetWindowPos
- MoveWindow
- EnableWindow
- GetDlgItem
- PostMessage
- SetFocus
- ShowCursor
- ShowWindow
- SystemParametersInfo
- 325KB
- 107KB
- 128KB
- NECCD
- Arial
- NEC Simple Start...
- NEC Simple Start
- \SCSI.
- nec.z
- NEC Simple Start
- \smplhelp.hlp.
- WinHelp.exe
- DLG_WELCOME
- DLG_WELCOME!
- Due to a system error, Setup cannot show a dialog box.
- DLG_WELCOME
- DLG_WELCOME
- DLG_GETNAMECO
- DLG_GETNAMECO!
- Due to a system error, Setup cannot show a dialog box.
- DLG_GETNAMECO
- DLG_GETNAMECO
- DLG_GETNAMECO
- DLG_GETNAMECO
- DLG_GETNAMECO
- DLG_GETNAMECO
- DLG_GETNAMECO
- DLG_CDLETTER
- DLG_CDLETTER!
- Due to a system error, Setup cannot show a dialog box.
- Setup could not be completed due to an error in ListCreate
- ListCreate - Fixed
- Setup could not be completed due to an error in ListCreate
- Error
- Not Deleted!
- DLG_CDLETTER
- DLG_CDLETTER
- DLG_CDLETTER
- DLG_CDLETTER
- DLG_CDLETTER
- device
- Lastdrive
- \CDROM\NECCDR.SYS /d:.
- Could not open the file named
- Please verify the file
- config.nec
- \CDROM\NECCDR.SYS /d:.
- LASTDRIVE=Z
- MSCDEX.EXE
- \CDROM\MSCDEX.EXE /d:
- /M:
- /l:
- \CDROM\MSCDEX.EXE /d:.
- /l:
- \CDROM\MSCDEX.EXE /D:.
- autoexec.necI
- autoexec.bat
- DLG_AUTOEXEC
- DLG_AUTOEXEC
- DLG_CUSTINST
- DLG_CUSTINST!
- Due to a system error, Setup cannot show a dialog box.
- DLG_CUSTINST!
- Setup will place SimpleStart into the following directory,
- which it will create, if necessary, on your hard disk.
- DLG_CUSTINST
- DLG_CUSTINST
- The path you specified is not a valid path.
- Please choose another path.
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- The directory you have specified to install
- the application is not writable.
- Please choose another directory.
- Unable to create the directory you have specified,
- please specify another directory location.
- Insufficient Disk Space*
- Setup has determined that you do not have the
- required amount of disk space on the selected
- drive for the options that have been selected.
- Choose a different set of components from Custom Installation dialog.
- Warning
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_CUSTINST
- 21KB,
- DLG_CUSTINST
- DLG_CUSTINST
- DLG_HELP
- DLG_HELP!
- Due to a system error, Setup cannot show a dialog box.
- DLG_HELP
- DLG_HELP
- Glossary of Terms
- WINHELP
- \HELP\glossary.HLP.
- Questions and Answers
- WINHELP
- \HELP\q&a.HLP.
- NEC CD Test
- \CDROM\.
- NECTEST.EXE.
- NEC CD Explorer Help
- WINHELP
- \cdrom\cdexplor.HLP.
- NEC CD Explorer
- \CDROM\.
- CDEXPLOR.EXE.
- NEC Configuration Managerr
- \CONFMNGR\.
- confmngr.EXE.
- \WINDOWS\v18fcamd.386.
- SYSTEM.INI
- 386Enh
- device
- Simple Start File Copy!
- CDROM.
- CDROM\*.*
- An error has occurred while attempting to decompress
- CD-ROM directory
- CONFMNGR.
- CONFMNGR\*.*
- An error has occurred while attempting to decompress
- Configuration Manager directory
- An error has occurred while attempting to decompress
- Main directory
- NETWARE.
- NETWARE\*.*
- An error has occurred while attempting to decompress
- NETWARE directory
- HELP.
- HELP\*.*
- An error has occurred while attempting to decompress
- Help directory
- DOS\*.*
- An error has occurred while attempting to decompress
- DOS directory
- WINDOWS.
- WINDOWS\*.*
- An error has occurred while attempting to decompress
- WINDOWS sub-directory
- CDROM.
- CDROM\*.*
- An error has occurred while attempting to decompress
- CD-ROM directory
- CONFMNGR.
- CONFMNGR\*.*
- An error has occurred while attempting to decompress
- Configuration Manager directory
- NETWARE.
- NETWARE\*.*
- An error has occurred while attempting to decompress
- NETWARE directory
- HELP.
- HELP\*.*
- An error has occurred while attempting to decompress
- HELP sub-directory
- DOS\*.*
- An error has occurred while attempting to decompress
- DOS sub-directory
- WINDOWS.
- WINDOWS\*.*
- An error has occurred while attempting to decompress
- WINDOWS sub-directory
- An error has occurred while attempting to decompress
- Main directory
- CDROM.
- CDROM\NECCDR.SYS
- An error has occurred while attempting to decompress
- NECCDR.SYS file
- CDROM\MSCDEX.EXE
- An error has occurred while attempting to decompress
- MSCDEX.EXE file
- Simple Start File Copy!
- Decompressing NEC.Z
- Simple Start File Copy
- Simple Start.
- Please insert Disk
- An error has occured while copying the file %s. The file was not copied.
- Error FS_OPERROR.!
- An error has occured while copying the file %s. The file was not copied.
- Error FS_GENERROR.!
- Unable to write to destination location.
- Incorrect disk inserted.
- Please insert the correct disk.
- Incorrect disk inserted. Please insert the disk labeled
- Disk 1
- Unable to copy files due to an internal error.
- Unable to copy files to destination due to insufficient disk space.
- Error FS_OUTOFSPACE.
- An error occured while copying and decompressing files.
- Simple Start File Copy
- Setup could not be completed due to errors.
- Please clear up the causes of the errors and try again.
- \MYRES.DLL.
- Internal error. Unable to create custom dialog.
- Exiting installation program.
- Are you sure you want to quit the Setup program?
- DLG_INSTALLCOMPLETE
- DLG_INSTALLCOMPLETE!
- Due to a system error, Setup cannot show a dialog box.
- DLG_INSTALLCOMPLETE
- DLG_INSTALLCOMPLETE
- Setup cannot open the CONFIG.SYS file.
- DLG_CONFIG
- DLG_CONFIGEX!
- Due to a system error, Setup cannot show a dialog box.
- DLG_CONFIGEX!
- DLG_CONFIGEX
- CONFIG.NEW
- DLG_CONFIGEX
- DLG_CONFIGEX
- DLG_CONFIGEX
- DLG_CONFIGEX
- DLG_CONFIGEX
- NECCD
- ASPICD
- ASPICD
- DLG_CONFIG!
- Due to a system error, Setup cannot show a dialog box.
- DLG_CONFIG
- CONFIG.NEW
- DLG_CONFIG
- DLG_CONFIG
- DLG_CONFIG!
- DLG_CONFIGEX
- DLG_CONFIG
- device
- Lastdrive
- \CDROM\NECCDR.SYS /d:.
- DLG_CONFIG
- \CDROM\MSCDEX.EXE /d:.
- \CDROM\MSCDEX.EXE /d:.
- DLG_CONFIG
- DLG_CONFIG
- DLG_CONFIG
- DLG_CONFIG
- DLG_CONFIG
- TEMP.SYS"
- Cannot create file:
- TEMP.SYS
- temp.sys
- Could not create a file named CONFIG.SYS
- temp.sys
- Cannot create file:
- The updated version of your CONFIG.SYS file
- has been saved as
- Could not open the file named
- Please verify the file
- config.nec
- FILES"
- BUFFERS"
- \CDROM\NECCDR.SYS /D:.
- LASTDRIVE=
- Could not write to the file named
- Please verify that the file is not write protected
- Setup has made the appropriate changes to your CONFIG.SYS file.
- FILES"
- BUFFERS"
- DLG_BATCH
- Cannot open AUTOEXEC.BAT file.
- DLG_BATCHEX!
- Due to a system error, Setup cannot show a dialog box.
- DLG_BATCHEX
- AUTOEXEC.NEW.
- DLG_BATCH
- DLG_BATCHEX
- DLG_BATCHEX!
- DLG_BATCHEX
- DLG_BATCHEX
- DLG_BATCHEX
- DLG_BATCH!
- Due to a system error, Setup cannot show a dialog box.
- DLG_BATCH
- AUTOEXEC.NEW.
- DLG_BATCH
- DLG_BATCH
- DLG_BATCH!
- DLG_BATCHEX
- DLG_BATCH
- \CDROM\MSCDEX.EXE /d:.
- \CDROM\MSCDEX.EXE /d:.
- DLG_BATCH
- DLG_BATCH
- DLG_BATCH
- DLG_BATCH
- DLG_BATCH
- DLG_BATCH
- TEMP.BAT"
- Cannot create file:
- TEMP.BAT
- TEMP.BAT
- TEMP.BAT
- \CDROM\MSCDEX.EXE /d:
- \CDROM\MSCDEX.EXE /d:
- Could not load your AUTOEXEC.BAT file into memory
- Could not backup your AUTOEXEC.BAT file
- PATH"
- Unable to write to AUTOEXEC.BAT file.
- The updated version of your AUTOEXEC.BAT file
- has been saved as
- MSCDEX.EXE
- \CDROM\MSCDEX.EXE /d:
- \CDROM\MSCDEX.EXE /d:
- PATH"
- Unable to write to AUTOEXEC.BAT file.
- autoexec.necI
- autoexec.bat
- Setup has made the appropriate changes to your AUTOEXEC.BAT file.
- DLG_OPTIONS
- DLG_OPTIONS!
- Due to a system error, Setup cannot show a dialog box.
- DLG_OPTIONS
- DLG_OPTIONS
- DLG_OPTIONS
- DLG_OPTIONS
- DLG_OPTIONS
- DLG_OPTIONS
- DLG_OPTIONS!
- DLG_OPTIONS!
- DLG_OPTIONS
- DLG_OPTIONS
- DLG_OPTIONS
- DLG_INSTALLTYPE
- DLG_INSTALLTYPE!
- Unable to show Installation Type dialog.
- DLG_INSTALLTYPE
- DLG_INSTALLTYPE
- GetModuleHandle
- ShowCursor!
- ShowWindow!
- SetFocus!
- GetDlgItem!
- Enable!
- SetWindowText!
- IsWindow!
- GetWindowRect!
- WINRECTSTRUCT
- origX
- WINRECTSTRUCT
- origY
- WINRECTSTRUCT
- WINRECTSTRUCT
- GetClientRect!
- WINRECTSTRUCT
- origX
- WINRECTSTRUCT
- origY
- WINRECTSTRUCT
- WINRECTSTRUCT
- SetWindowPos!
- MoveWindow!
- PostMessage!
- ShowWindow!
- ShowWindow!
- InstallSHIELD can not call DLL function:
- 2.00.065
-